Application

Xtreme

vdw 850 plus

The PHNA Xtreme is a 2-component epoxy paving joint compound designed for large format natural stone, concrete paver surfaces, and other high traffic areas - both residential and commercial. The following are a few specific details about the product:

Features

• Water-permeable
• Can be applied in rain and low temperatures
• Self-compacting
• Clean, stain-free surface
• No need to protect surface from rain
• Highly frost and de-icing salt resistant
• Durable and abrasion resistant
• Pressure washer friendly
• 3/16'' joint width or larger
• For light to medium traffic loads

Available Colors

Neutral

Stone Grey

Basalt

Technical Data

• Application Time
  Approx. 30 minutes at 20°C | 68°F* application temp.
  * Quick hardening at higher temperatures, and slow hardening at lower temperatures.
• Application Temperature
  2-26°C | 37-80°F (Do not lay onto frozen ground.)
• Compressive Strength
  33.1 N/mm² / 4800 psi
• Flexural Strength
  10.3 N/mm² / 1494 psi
• E-Modulus
  5500 N/mm²
• Dry Density
  Set mortar density: 1.62 g/cm³
• Water Permeability
  approx. 0.05 gal/min/sq. ft. for a joint fraction of 20%
• Storage Life
  1 year if stored unopened in sealed and undamaged packaging. Must also be kept dry and frost-free. Do not store at temperatures above 20°C / 68°F

Application

Xtreme Ceramic

vdw 815 plus

The PHNA Xtreme Ceramic is a 2-component epoxy paving joint compound designed for narrow joints - especially those between ceramic tile. The following are a few specific details about the product:

Features

• Water-permeable
• Can be applied in rain and low temperatures
• Self-compacting
• Clean, stain-free surface
• No need to protect surface from rain
• Highly frost and de-icing salt resistant
• Durable and abrasion resistant
• Pressure washer friendly
• 1/8'' joint width or larger
• For light traffic loads

Available Colors

Neutral

Stone Grey

Basalt

Technical Data

• Application Time
  Approx. 30 minutes at 20°C | 68°F* application temp.
  * Quick hardening at higher temperatures, and slow hardening at lower temperatures.
• Application Temperature
  2-26°C | 37-80°F (Do not lay onto frozen ground.)
• Compressive Strength
  19.6 N/mm² / 2843 psi
• Flexural Strength
  8.8 N/mm2 / 1276 psi
• Minimum Joint Requirements
  1/8" joint width
  Full joint depth - Recommended 20 mm / 0.79" in bonded bedding; 30 mm / 1.18" in non-bonded bedding
• Dry Density
  Set mortar density: 1.6 g/cm³
• Water Permeability
  approx. 0.1 gal/min/sq. ft. for a joint fraction of 10%
• Storage Life
  1 year if stored unopened in sealed and undamaged packaging. Must also be kept dry and frost-free. Do not store at temperatures above 20°C / 68°F

Application

Xtreme Plus

vdw 855

The PHNA Xtreme Plus is a 2-component epoxy paving joint compound designed for small or large format natural stone or concrete paver surfaces in heavily used and heavily trafficked areas - such as roads, loading areas, or town centers. The following are a few specific details about the product:

Features

• Very slightly water-permeable
• Can be applied in rain and low temperatures
• Self-compacting
• Clean, stain-free surface
• No need to protect surface from rain
• Highly frost and de-icing salt resistant
• Durable and abrasion resistant
• Pressure washer friendly
• 5/16'' joint width or larger.
• For heaviest traffic loads

Available Colors

Neutral

Stone Grey

Basalt

Technical Data

• Application Time
  Approx. 30 minutes at 20°C | 68°F* application temp.
  *Quick hardening at higher temperatures, and slow hardening at lower temperatures.
• Application Temperature
  2-26°C | 37-80°F (Do not lay onto frozen ground.)
• Compressive Strength
  50.3 N/mm² / 7295 psi
• Flexural Strength
  15.3 N/mm² / 2219 psi
• E-Modulus
  8500 N/mm²
• Dry Density
  Set mortar density: 1.86 g/cm³
• Water Permeability
  approx. 0.005 gal/min/sq. ft. for a joint fraction of 20%
• Storage Life
  1 year if stored unopened in sealed and undamaged packaging. Must also be kept dry and frost-free. Do not store at temperatures above 20°C / 68°F

Application

Xtreme Stone Protect 3-in-1

vdw 950

The PHNA Xtreme Stone Protect 3-in-1 is a ready-to-use, water-based impregnation for the hydrophobic (water repelling) and oleophobic (oil repelling) treatment of natural stone and other porous paving units. Can also be used as a pre-treatment before grouting with PHNA jointing compounds to reduce any residual binder film on sensitive paving surfaces. The following are a few specific details about the product:

Features

• Water-based formula
• Invisible
• For natural stone and concrete pavers
• Grouting relief for subsequent jointing with epoxy binder
• Suitable for use on sensitive stones before jointing to reduce staining
• Hydrophobic - water repellent
• Oleophobic - oil repellent
• Solvent-free

Technical Data

• Application Temperature
  10-26°C | 50-80°F Ambient and surface temp.
• Open to Pedestrian Traffic
  After 5 hours at 20°C | 68°F and 65% rel. humidity
• Full Effect
  After 24 hours at 20°C | 68°F and 65% rel. humidity
• Duration
  Approx. 2 years (dependent on the surface type, level of product absorption, and exposure)
• Density
  Approx. 1.0 g/l
• PH Value
  Approx. 5
• Consumption
  Approx. 50 - 100 sq. ft. per liter | 250 - 500 sq. ft. per unit (Highly dependent on the absorbency of the substrate, and in case of doubt, should be determined by applying a test area first)
• Storage Life
  1 year if stored unopened in sealed and undamaged packaging. Must also be kept dry, cool and frost-free.